Aerial platforms built for work that can’t fail.
Airframe, payload and ground control engineered as one stack — not assembled from parts. Configured for agriculture, infrastructure inspection, emergency response and cargo delivery, and delivered with documentation that clears customs.
One supplier for the airframe,
the payload and the paperwork.
Most UAV procurement breaks down at the seams — an airframe from one vendor, a gimbal from another, a ground station from a third, and nobody accountable when the integration fails in the field. We build and integrate the whole chain, so there is one specification, one test report and one point of contact.
Twelve categories, one interface.
Every platform shares the same flight control stack, the same ground station and the same payload interface — so training, spares and integration carry across the fleet.
ZF-2500
Long range2,300 km of range with a 50 kg mission payload. Catapult launch, parachute recovery.
ZF-U150
Intelligent spraying120 L tank, 2,600 mm wheelbase, 5 kW rated power — built for large farms.
ZF-V15
Mapping2.5 m wingspan, 15 kg MTOW, 3.5 h endurance. No runway needed.
ZF-SL-200
Heavy transport220 kg MTOW, 100 kg payload, 50 km operating radius.
ZF-H60
Inspection110 kg MTOW, 15 m/s fully loaded, flown with EO/IR gimbals for line patrol.
ZF-40V
Heavy payload4,000 mm wingspan, 40 kg MTOW, 15 kg payload, 5,000 m service ceiling.
Configured for the job,
not for the brochure.
A platform is only half the answer. Each solution bundles the airframe, the right payload, the flight planning profile and the data pipeline your team actually uses.
Agriculture & crop protection
Variable-rate spraying, multi-spectral scouting and yield mapping — with fleet scheduling that survives a real season.
02Power & utility inspection
Transmission corridors, towers and substations surveyed with EO/IR payloads and defect detection on the returned imagery.
03Emergency response
Fire scene reconnaissance, search and rescue, and supply drops where roads are gone. Deployable from a vehicle in minutes.
04Surveying & mapping
Photogrammetry and LiDAR capture with ground control and deliverables your GIS team can ingest directly.
Built in-house,
tested before it ships.
Airframes are laid up, assembled and calibrated in our own facility. Every unit runs a factory acceptance test — hover or flight stability, payload function, link range and failsafe behaviour — before it is packed.
- AirframeComposite layup, tooling and structural assembly
- AvionicsFlight control, datalink and ground station integration
- PayloadGimbal, tank, dispenser and sensor mounting
- ComplianceTest reports, export documentation, operator training
From requirement to delivery.
No catalogue-only selling. We start from the mission profile and work back to a configuration that can actually execute it.
Requirement review
Payload, endurance, launch and recovery constraints, operating environment, crew skill level.
Configuration & quote
Platform, payload and spares selected against the mission. Written specification, not a datasheet copy.
Production & FAT
Build slot confirmed, factory acceptance test witnessed or recorded, packing list signed off.
Delivery & support
Export documents, shipping, on-site or remote training, warranty and spare parts channel.